The plant list below is not exhaustive, and Arrose Engineering has a flexible investment policy. Arrose Engineering would consider investment options that would facilitate more economic manufacturing of customer products on a firm order basis.
CNC - Arrose runs a number of CNC lathes, mainly Nakamura and Mori-Seiki models, employing up to 250mm chucks and 51mm diameter bar capacity. The CNC lathe section includes a limited cross drilling and milling facility.
Multi-spindles - Arrose have multi-spindle lathes of up to 1” diameter bar capacity, including pick-off and threading for high volume products.
Cam-autos - Arrose utilise a range of cam-auto lathes with capacities up to 16mm, 25mm and 42mm bar ranges. On machine pick-off, back deburr / slotting etc is available.
Capstan Lathes - Capstan lathe capacity at Arrose Engineering is 8” chucking, and 54mm diameter bar.
Milling - Arrose operate a number of horizontal production millers - including rise and fall capabilities – with table sizes from 400x150mm to 1400x300mm.
Drilling - Arrose have a number of conventional production drills – from 1mm diameter high-speed to 32mm diameter – including multi-drill head production.
Additional Facilities - In addition to the facilities described in detail above, Arrose Engineering have in-house facilities for the following:-
Centreless grinding, riveting, vibratory deburring, CAD drawing and assembly.
Outwork
In order for Arrose Engineering to offer a comprehensive service, we have a network of suppliers that offer the following facilities:
Plating, anodising, heat treatment, welding, polishing etc
Arrose Engineering rarely produce batches of less than 30, so a good relationship has been developed with a small batch specialist to ensure that a comprehensive service can be offered - either through Arrose Engineering or directly with the specialist.